DXCAT®ZF-10

Product Introduction:

It is a highly efficient reactive low-volatility foaming catalyst. 

Product Application:

It is used for polyether polyurethane flexible foam, molded foam, hardfoam for packaging, etc.; ZF-10 can be used to replace the traditional catalystbis(dimethylaminoethyl) ether in equal amounts to reduce VOC emissions in thesystem and replace the traditional polyurethane foaming catalyst A-1. It isrecommended for high-resilience flexible molded foams, such as: automotive PIPintegrated foam headrest, low-density all-water packaging foam and low-densityall-water spray polyurethane foam. It has low odor characteristics, which canprevent blindness caused by odor volatilization problems during use, etc., andgreatly improve the operating environment of workers.

Structural formula:

Physical property indicators:                          

Boiling point (normal pressure °C)	254-259
Flash point(°C)	118
Specific gravity(20/20 °C)	0.95
Viscosity(25°C mPa.s)	12

Purity (wt.%)	99min. (Meteorological chromatography)
Color (Pt-Co)	100max.   (Spectrophotometer)
Moisture content (wt.%)	0.5max. Karl Fischer Moisture Meter
Appearance	Colorless to light yellow transparent liquid

Storage and Transportation:

It should be sealed and stored in a dry, cool and ventilated warehouse.

Packaging:

Drum (25kg/180kg), square box and tank car can be provided according tocustomer requirements.

Notes:

Please tighten the packaging cap as soon as possible after use toprevent the mixing of other substances such as moisture and affect theperformance of the product. Store in a cool, dry place and keep containertightly sealed to avoid contact with oxides. Do not inhale dust and avoidcontact between skin and mucous membranes. Smoking, eating and drinking areprohibited in the workplace. After work, shower and change. Store contaminatedclothes separately and wash them before use. Practice good hygiene.